 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STTH6002C High efficiency ultrafast diode Main product characteristics IF(AV) VRRM Tj (max) VF (typ) trr (typ) 2 x 30 A 200 V 175 C 0.75 V 22 ns A1 A2 K A2 Features and benefits A1 K Suited for SMPS Low losses Low forward and reverse recovery times High surge current capability High junction temperature TO-247 STTH6002CW NC Description Dual center tab rectifier suited for switch mode power supplies and high frequency DC to DC converters. Packaged in TO-247 and TOP3I, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection A2 A1 K TOP3I STTH6002CPI Order codes Part Number STTH6002CW STTH6002CPI Marking STTH6002C STTH6002C April 2006 Rev 2 www.st.com 1/9 Characteristics STTH6002C 1 Table 1. Symbol VRRM IF(RMS) Characteristics Absolute ratings (limiting values at Tj = 25 C, unless otherwise specified) Parameter Repetitive peak reverse voltage RMS forward current TO-247 IF(AV) Average forward current, = 0.5 TOP3I IFSM Tstg Tj Surge non repetitive forward current Storage temperature range Maximum operating junction temperature tp = 10 ms Sinusoidal Per diode Tc = 140 C Per device Tc = 125 C Per diode Tc = 120 C Per device Tc = 105 C Value 200 50 30 60 A 30 60 330 -65 to +175 175 A C C Unit V A Table 2. Symbol Thermal parameters Parameter Per diode TO-247 Total 0.8 1.8 C/W Total TO-247 1.20 0.4 0.6 Value 1.2 Unit Rth(j-c) Junction to case Per diode TOP3I Rth(c) Coupling TOP3I When the two diodes 1 and 2 are used simultaneously: Tj(diode 1) = P (diode 1) X Rth(j-c) (Per diode) + P (diode 2) x Rth(c) 2/9 STTH6002C Table 3. Symbol IR(1) Characteristics Static electrical characteristics Parameter Test conditions Tj = 25 C Tj = 125 C Tj = 25 C VR = VRRM IF = 30 A IF = 60 A IF = 30 A IF = 60 A 0.75 0.9 Typ Max. 30 A 30 300 1.05 1.18 0.84 0.99 V Unit Reverse leakage current VF(2) Forward voltage drop Tj = 150 C 1. Pulse test: tp = 5 ms, < 2 % 2. Pulse test: tp = 380 s, < 2 % To evaluate the conduction losses use the following equation: P = 0.69 x IF(AV) + 0.005 IF2(RMS) Table 4. Symbol trr IRM tfr VFP Dynamic characteristics Parameter Reverse recovery time Reverse recovery current Forward recovery time Forward recovery voltage Test conditions IF = 1 A, dIF/dt = 200 A/s, VR = 30 V, Tj = 25 C IF = 30 A, dIF/dt = 200 A/s, VR = 160 V, Tj = 125 C IF = 30 A, dIF/dt = 200 A/s VFR = 1.1 x VFmax, Tj = 25 C IF = 30 A, dIF/dt = 200 A/s, Tj = 25 C 2.5 Typ 22 7.6 Max. 27 9.5 220 Unit ns A ns V Figure 1. IM(A) 200 Peak current versus duty cycle (per diode) T Figure 2. Forward voltage drop versus forward current (per diode) IFM(A) 300 IM 180 160 140 d=tp/T tp 250 Tj=150C (typ values) 200 120 P = 20 W 100 80 60 40 20 P = 10 W P=5W 150 Tj=150C (max values) 100 50 Tj=25C (max values) VFM(V) 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 3/9 Characteristics STTH6002C Figure 3. Relative variation of thermal Figure 4. impedance junction to case versus pulse duration C(pF) 1000 Junction capacitance versus reverse applied voltage (typical values) Zth(j-c)/Rth(j-c) 1.0 Single pulse F=1MHz Vosc=30mVRMS Tj=25C tp(s) 0.1 1.E-03 100 VR(V) 1.E-02 1.E-01 1.E+00 1 10 100 1000 Figure 5. Reverse recovery charges versus dIF/dt (typical values) Figure 6. Reverse recovery time versus dIF/dt (typical values) QRR(nC) 350 300 250 200 150 100 50 0 10 100 1000 Tj=25 C Tj=125 C IF= 30 A VR=160V tRR(ns) 100 90 80 70 60 50 40 30 20 dIF/dt(A/s) Tj=25 C Tj=125 C IF= 30A VR=160V 10 0 10 100 dIF/dt(A/s) 1000 Figure 7. Peak reverse recovery current versus dIF/dt (typical values) Figure 8. Dynamic parameters versus junction temperature IRM(A) 16 14 12 10 IF= 30A VR=160V QRR; IRM [T j] / Q RR; IRM [T j=125C] 1.4 1.2 1.0 0.8 IRM IF=30A VR=160V 8 6 4 2 0 10 Tj=125 C 0.6 QRR 0.4 0.2 Tj=25 C dIF/dt(A/s) Tj(C) 0.0 25 50 75 100 125 150 100 1000 4/9 STTH6002C Ordering information scheme 2 Ordering information scheme STTH 60 02 Cxx Ultrafast switching diode Average forward current 60 = 60 A Repetitive peak reverse voltage 02 = 200 V Package CW = TO-247 CPI = TOP3I 5/9 Package information STTH6002C 3 Package information Epoxy meets UL94, V0 Cooling method: by conduction (C) Recommended torque value: 0.8 Nm Maximum torque value: 1.0 Nm Table 5. TO-247 Dimensions DIMENSIONS REF. Millimeters Min. A D V Inches Min. 0.191 0.086 0.015 0.039 0.118 0.078 Typ Max. 0.203 0.102 0.031 0.055 Typ Max. 5.15 2.60 0.80 1.40 4.85 2.20 0.40 1.00 3.00 2.00 2.00 3.00 10.90 15.45 19.85 3.70 18.50 14.20 34.60 5.50 2.00 5 60 3.55 E F Dia. V F1 H A F2 F3 2.40 3.40 0.078 0.118 0.429 0.094 0.133 L5 F4 G L2 L4 F2 F3 V2 F(x3) G = = M E F4 L3 L H L D 15.75 0.608 20.15 0.781 4.30 0.145 0.728 14.80 0.559 1.362 0.216 3.00 0.078 5 60 3.65 0.139 0.620 0.793 0.169 F1 L1 L1 L2 L3 L4 L5 M V V2 Dia. 0.582 0.118 0.143 6/9 STTH6002C Table 6. TOP3I dimensions Package information DIMENSIONS REF H R B Millimeters Min. Max. 4.6 Inches Min. 0.173 Max. 0.181 A A OL 4.4 B C D F G 1.45 14.35 0.5 2.7 15.8 20.4 15.1 5.4 3.4 4.08 1.20 1.55 15.60 0.7 2.9 16.5 21.1 15.5 5.65 3.65 4.17 1.40 0.057 0.565 0.020 0.106 0.622 0.815 0.594 0.213 0.134 0.161 0.047 0.061 0.614 0.028 0.114 0.650 0.831 0.610 0.222 0.144 0.164 0.055 K E F P G C H J D E J J K OL P R 4.60 Typ. 0.181 Typ. In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 7/9 Ordering information STTH6002C 4 Ordering information Part Number STTH6002CW STTH6002CPI Marking STTH6002C STTH6002C Package TO-247 TOP3I Weight 4.46 g 4.7 g Base qty 30 30 Delivery mode Tube Tube 5 Revision history Date Feb-2004 05-Apr-2006 Revision 1 2 First issue Reformatted to current template. Package TOP3I added. Description of Changes 8/9 STTH6002C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of STTH6002CPI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |